01Why visit both moons and bring a sample home?#
The Martian Moons eXploration mission, or MMX, is led by JAXA with contributions from NASA, ESA, France’s CNES, and Germany’s DLR. It will study Mars’s two small moons, Phobos and Deimos, then collect a sample from Phobos and return it to Earth. The moons may be captured asteroids or debris from an ancient impact on Mars; observations and laboratory analysis of returned material can test those competing explanations.[1][3][4]
MMX combines remote sensing, surface operations, and sample return to constrain the origin of Phobos and Deimos. In the impact-origin model, material from Mars may be mixed into the moons; in the capture model, the moons would more closely retain the properties of small bodies formed elsewhere. Neither hypothesis is established by the mission plan itself. The spacecraft is scheduled to launch on H3 on 20 October 2026 in Japan (19 October UTC), reach Mars in 2027, and return its capsule in 2031.[1][3][4][5]
02Mapping a small world before landing#
After reaching Mars, MMX is planned to fly in a quasi-satellite orbit near Phobos while mapping the moon and examining candidate landing sites. The spacecraft will also observe Deimos from a distance. A CNES–DLR rover named Idefix is planned to touch down before the main spacecraft and investigate the surface, helping teams understand the local terrain before sample collection.[1][2][3]
A quasi-satellite orbit (QSO) follows a path around Mars similar to Phobos’s own orbit, keeping the spacecraft near the moon for repeated observations. It is not a low circular orbit around Phobos. Imaging, laser ranging, and spectroscopy will characterize shape, topography, and surface composition to inform site selection. Idefix will assess regolith properties in Phobos’s very weak gravity, where contact, mobility, and spacecraft settling behave differently from operations on a large planetary body.[1][2][3][6]
03Two collection methods, one return capsule#
MMX is designed to collect at least 10 grams of Phobos material using two samplers. A corer is intended to gather material from below the surface, while a NASA-contributed pneumatic sampler uses a brief burst of nitrogen to lift loose grains. A return capsule will carry the collected material through Earth’s atmosphere for laboratory study, extending the sample-return approach used by JAXA’s Hayabusa2 at an entirely different destination.[2][4][3]
The sampling architecture pairs a corer that targets material to roughly 2 cm depth with a pneumatic device that mobilizes surface grains using pressurized nitrogen. The complementary designs provide different ways to acquire regolith under uncertain surface and contact conditions; the planned minimum return is 10 g, not a guarantee of a particular scientific result. NASA also contributes the MEGANE gamma-ray and neutron spectrometer, and NASA’s Deep Space Network supports communications and navigation. ESA supplies communications equipment and ground-station support.[2][4][3]
